Structured Networking (175 products)

Connectix Cat6 Easy RJ45 Pass through Connectors have been designed with...

1 Pot = 100 plugs1 Box = 20 PotsOur 'Easy' range of RJ45 pass through plugs are made from high quality engineered plastic with brass gold over nickel plating contacts. For best results use with the 'Easy crimp tool allows you to cut, strip and terminate a plug all in one. The Crimp tool Trims the excess wires as it crimps Features & BenefitsEasy to verify RJ45 568A or 568B colour code Gold Plated Contacts For best results use Connectix Easy RJ45 Crimp Tool Cat6 PerformanceSee below for the 4 step 'Easy' Instructions1 Remove... More Info

Modular adapter that has a DB9 female connector that plugs into DB9 RS232...

This RJ45 adapter is used to run RS232/Serial data over longer distances using Cat5e cable to bridge the gap. Used in pairs and have selectable pin assignment to enable them to be used for a variety of purposes. Features: Gold plated pin 28AWG wire Thumb screw More Info

Available on a 305m Box.

Connectix Category 6A F/FTP Cable has been designed to provide the exceptional performance required to support extremely high speed applications, including 10-Gigabit Ethernet.The cable consists of 4 screened pairs, drain wire and additional outer foil. It helps to alleviate the problems of NEXT and alien crosstalk. The sheath is a Low Smoke Zero Halogen (LSZH) material, as specified in many public buildings. This cable has a Euroclass rating of B2ca, so ideal where BS6701 compliance is required. Supplied in 305m Box. More Info

Extra long Booted Cat6 Patch Leads - Available from 30mt to 90mt

Connectix Cabling System Long RJ45 Patch leads are available in lengths from 30mt to 90mt. These RJ45 leads are made to order using high quality Cat6 connectors in Cat6 UTP Cable. Each patch cable is individually tested and bagged to ensure quality and performance. Features: Each lead is individually bagged & QA tested  Plugs conform to ISO8877 More Info

Fits Euro Size faceplate. 25mm x 50mm

Designed to take the place of a euro style module, the half blank simply clips into any euro sized faceplate. More Info

Cat6a FTP Crimp plugs. Pk 50

These two piece Cat6a FTP RJ45 plugs are suitable for use only with Cat6a Solid Core Cable Compatible with our universal RJ45 crimp tool. Sold in Pk 50 More Info

Cat6 Desk Pod with options for 4 outlets

The 4 desktop pod is a convenient high density desk outlet. Incorporating industry standard IDC connections in a robust steel  enclosure. This unit is suitable for a multitude of applications, including underfloor transition points. More Info

Available in 25m rolls.

Our braided sleeving offers a flexible cable protection, high abrasion resistance and ease of application. The special braid construction permits the sleeving bore to beexpanded up to 300%.This is suited for the mechanical protection of wire harnesses, hoses and all other applications where exceptional flexibility combined with superior abrasion / cut resistance is required. It also serves as an economical means for wire bundling that will not trap heat or moisture, expanding over irregular shapes, and then contracting to conform and... More Info

Faceplates pre-loaded with Cat6 FTP Modules. Available with 1 or 2 or 4 modules

The Connectix Enhanced Category 6 way loaded faceplate consists of 1 or two modules in loaded in a singlegang faceplate or 4 modules loaded in a doublegang faceplate. With their rounded corners these loaded faceplates fit perfectly onto our Office style back boxes Ready assembled outlet, ready for installation. Exceeds Enhanced Cat6 specification when used alongside our cable and patch panels Module DetailsThe Connectix Category 6 Compact Module is designed to provide one of the shallowest wall outlets on the market. They are the ideal... More Info

Right Angled High density 24 Shielded FTP ports in 1u of space

The Connectix 2020 Series FTP Patch Panel is an alternative to the Standard Enhanced Category 5 FTP Panel. It offers the same Enhanced Category 5 performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear of the panel, making termination and cable management easier. All sockets in the panel are commonly linked through the panel and can be grounded to the rack using the earth wire provided. Enhanced Category 5 panels provide exceptional performance for high speed LANs... More Info

StarTech.com 1U Velcro Horizontal Server Rack Cable Management Panel - 4 Loop...

The CMVELC1U Velcro Cable Management Panel mounts to a standard 19" 2 or 4-post rack to organize cables while keeping dust and dirt out of the rack. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.Constructed of high quality steel with 4 Velcro loops, the 1U cable manager enables you to bundle and route cables as needed for simple cable organization. The panel also promotes proper airflow through the rack by closing off open spaces between... More Info

Tamper Proof Cat6 Outlets - Available with 2 or 4 Outlets

The Connectix 4000 Series offers Enhanced Category 6 performance in a High Density package. The Tamperproof outlet restricts the user’s access to patch leads, eliminating unauthorised or accidental patch lead disconnection which is one of the most common causes of network problems. The 4000 Series is extremely quick and easy to install; just attach the base plate, snap in the PCB, punch down the cables and install the cover. But the Tamperproof version has the added benefit that leads cannot be unplugged without first removing the cover, and... More Info