Fibre Connectors & Adapters (14 products)

SC Fibre Optic Connectors available in Multimode & Singlemode options

The SC connector is one of the most popular connectors used today. It can be seen in every area of the communications environment, from a telecoms distribution room to a Local Area Network closet. The SC connector has set the standard for optical fibre connectors. SC connectors are manufactured using the best quality components and they exceed all areas of the standards covering optical fibre connectors. The one-piece design features pre-radiused ceramic ferrules, and are suitable for use with two part heat curing epoxies and cold cure... More Info

Xp-Fit Field Termination Kit XPF-P-F

No epoxy, polishing film, or other consumables are required, and there is no need for electrical power, allowing installers to get in and out of installation sites quickly Features:Fast installation to minimize osite labour costs Easy operation Quick assembly in under 2 minutes No adhesive or polishing required Compact tool without electrical powerKit Includes:Inner Cable Jacket Stripper + 125µm Buffer Remover Thermal Buffer Removal Tool Replacement Blade Set Precision Cleave Tool (Flat) Lint Free Dry Wipes Fiber Optic Cleaning Pen... More Info

ST Fibre Optic Connectors available in Multimode & Singlemode options

The ST Connector has been the mainstay of optical fibre connectors for many years. It can be found in almost every communications room worldwide, but used mainly in data communications systems. The ST optical fibre connector comprises of a nickel plated brass body and a ceramic ferrule/spring/crimp barrel assembly plus a crimp over sleeve and rubber boot. These connectors are suitable for 900μm and 2-3mm cables. The connector is precision made and manufactured to demanding specifications. Connectors are suitable for use with two part heat... More Info

SC Bulkhead Adapter available in Simplex/Duplex, Singlemode & Multimode Options

The SC adaptor is one of the most popular connectors used today. It can be seen in every area of the communications environment, from a telecoms distribution room to a Local Area Network closet.  More Info

LC Fibre Connector, available different fibre sizesSX= Simplex DX =Duplex

The LC connectors and adaptors set the standard for small optical fibre interconnects. With its simple to use latched lever locking mechanism preventing accidental disconnection and precision housing for optimum performance. The LC is a Small Form Factor (SFF) connector available for high density population and performance. The LC connector uses a 1.25mm ferrule, half the size of the ST. Otherwise, it is a standard ceramic ferrule connector and its good performance makes it highly favoured for singlemode terminations. LC connectors are... More Info

Bulkhead adapter available in Multimode and Singlemode options

The ST adaptor set the standard for optical fibre interconnects. With its simple to use bayonet locking mechanism, it preventing accidental disconnection. With the precision housing this adaptor gives the very best performance. Generally there are two types of alignment sleeve within an adaptor; phosphor bronze for multimode or zirconia (ceramic) for singlemode. More Info

Singlemode FC Connector 1.8mm

The FC Connector is used extensively in the telecommunications market, where long singlemode optical fibre cables can run upwards of 50km. In these extreme situations the connector needs to have extremely low loss and accurate geometry. The FC Optical Fibre Connector comprises of a nickel plated brass body and a ceramic ferrule/spring/crimp barrel assembly plus a crimp over sleeve and rubber boot. The connector is precision made and manufacturedto demanding specifications. The combination of a ceramic ferrule and a precision nickel plated... More Info

FC Adapter for use with Singlemode FC connectors

The FC connector and adaptor set are mainly used for singlemode applications where precision is required. With its simple to use locking threadmechanism preventing accidental disconnection, this provides a very secure connection. More Info

LC Fibre Adapter/Coupler Available in Multimode and Singlemode options

The LC connectors and adaptors set the standard for small optical fibre interconnects. With its simple to use latched lever locking mechanism preventing accidental disconnection and precision housing for optimum performance. The LC is a Small Form Factor (SFF) connector available for high density population and performance. More Info

For use with 2 SC Simplex Connectors

Securely transform your simplex connectors into a Duplex configuration with this easy-to-use clip, designed to hold them firmly together. More Info

Our Keystone adapters are compatible with SC Fibre connectors and can support both singlemode and multimode fibre and fascias can be either LJ6C or Euromod size.One Fascia is required for each module used in a faceplate.Features & BenefitsQuick and easy to install Easy to use reignition label Snap-fit to terminate Suitable for all standard Keystone applications Compact design Euro Module and LJ6C options available Fits the range of Connectix Faceplates More Info

XP Fit Plus SC Field Installable Connector

The XP Fit Plus is a pre-polished, pre-assembled connector compatible with the standard SC connector. In place of epoxy, an internal mechanical grip gently but effectively holds the fibre in place and can be installed in under two minutes. Without polishing or adhesives,the XP Fit Plus makes field installations quick and easy, eliminating the need for epoxy curing and hand polishing at the work site. Please Note: The connectors no longer come with the 'Jig', if required, this needs to be purchased separately. Features:Epoxy-free crimp... More Info