Rack PDU, basic, vertical, 220-240V, 32A, (20) C13, (6) C19
Wide range of input and output connections Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.Single input power source Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard... More Info
Vertical Cable Manager for NetShelter SX 750mm Wide 48U (Qty 2)
The vertical channels have smooth plastic fingers at 1U increments to allow patch cords to enter and exit in an organized manner.Includes: Installation guide, Mounting Hardware, Qty 6 - Cable retainers with snap hinges. More Info
Step-Down Transformer RM 2U 208V IN 120V OUT w/Hardwire Input/Output
Transformer for Step-down or Step-up or Isolation Step down transformer placed upstream of the UPS to avoid inrush current and saturation eliminating need to oversize transformerMeets UL Requirements More Info
NetShelter SX 42U 600mm x 1070mm, without doors, black
NetShelter SX 42U 600mm Wide x 1070mm Deep EnclosureStandard enclosure for low to medium density server and networking applications. Compact width to optimize data center space. 42U height to easily roll through doorways.Includes: Baying hardware, Documentation CD, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting Hardware, Pre-installed casters, Side PanelsGuaranteed Compatability Vendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19" equipment. The APC "Fits Like a Glove" money back... More Info
Containment Adapter for Easy Cooling Row CW, Rear, 42U, Black, 300mm wide
Containment Adapter for Easy Cooling Row CW, Rear, 42U, Black, 300mm wide A set of adapters engineered for full containment of row solutions to provide full containment and increase cooling efficiency. This rear adapter for 300mm wide Easy Chilled Water InRow Cooling includes a plenum spacer and metal rear door. More Info
In-Line Current Meter, 32A, 230V, IEC309-32A 3-PH, 3P+N+G
Metered rack Power Distribution Units (PDUs) provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur. More Info
Hinged Covers for NetShelter SX 750mm Wide 48U Vertical Cable Manager (Qty 2)
Snap-on hinge covers conceal cables for a clean, professional look and easy access.Includes: Installation guide. More Info
APC Rack PDU 9000 Switched, ZeroU, 16A, 100-240V, (21) C13/C15 & (3)...
Field-replaceable NMCIntegrated Network Management Card/Display Module can be replaced in the field to minimize downtime disruption in the unlikely event of a failure.High Retention OutletsWith no special power cords required, high retention outlets provide up to twice the holding force to reduce risk of accidental disconnect on 9000 series PDUs.60C Operating TemperatureSelect 9000 series PDUs provide the ability to operate in a maximum ambient air temperature of 60C (140F) at full load ensuring reliability and availability even in... More Info
NetShelter SX 42U 600mm x 1070mm, without sides or doors, black
NetShelter SX 42U 600mm Wide x 1070mm Deep EnclosureStandard enclosure for low to medium density server and networking applications. Compact width to optimize data center space. 42U height to easily roll through doorways.Includes: Baying hardware, Documentation CD, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting Hardware, Pre-installed casters, Side PanelsGuaranteed Compatability Vendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19" equipment. The APC "Fits Like a Glove" money back... More Info
Containment Adapter for Easy Rack, End Cap, 42U, Black, set of 2
Adapters for row solutions to provide full containment and increase cooling efficiency. These end caps fit on the adapters for the Easy Racks to seal the ends of the plenum on the front and rear of the row solution. More Info
2U, 30A, 208V, 12x C13s, 4x C19, NEMA L6-30P, 444 x 112 x 88 mm, 3360 g
AvailabilityAlarm Thresholds Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)Local Current Monitoring Display The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum... More Info
Vertical Cable Manager Netshelter SX 42U (4Qty)
4 piece cable management sections to allow patch cords to enter and exit in an organized manner. More Info