Fibre Networking (125 products)

MC110CS 1x 100M SC, 1x 100M RJ45, IEEE 802.3, IEEE 802.3u, IEEE 802.3x

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.- Extends fiber distance up to 20－60kmThe MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports shortwave (SX) laser specification at a full wire speed forwarding... More Info

MC111CS 1x 100M SC, 1x 100M RJ45, IEEE 802.3, IEEE 802.3u, IEEE 802.3x

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards- Adopts WDM technology, transmitting and receiving data on one single fiberThe MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The... More Info

MC112CS 1x 100M SC, 1x 100M RJ45, IEEE 802.3, IEEE 802.3u, IEEE 802.3x

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.- Adopts WDM technology, transmitting and receiving data on one single fiber. The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The... More Info

MC200CM 1x 1000M SC, 1x 1000M RJ45, IEEE 802.3ab & IEEE 802.3z

- Complies with IEEE 802.3ab and IEEE 802.3z- Provides switch configuration of Force /Auto transfer mode for FX port.- Extends fiber distance up to 0.5kmThe MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm... More Info

MC210CS 1x 1000M SC, 1x 1000M RJ45, IEEE 802.3ab & IEEE 802.3z

- Complies with IEEE 802.3ab and IEEE 802.3z- Provides switch configuration of Force /Auto transfer mode for FX port.- Extends fiber distance up to 15kmThe MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at... More Info

MC220L 1x 1000M LC, 1x 1000M RJ45, IEEE 802.3ab & IEEE 802.3z

- Complies with IEEE 802.3ab and IEEE 802.3z- FX port supports hot-swappable- Extends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiberThe MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the LC-Type connector. The MC220L supports shortwave (SX) laser specification at a full wire speed... More Info

MiniGBIC, 850nm, Multi-mode Fiber, 1.25Gbps, LC/UPC

The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requirement of LAN. Users can choose whether and which items to use the fiber modules according to the demand in order to lower cost. More Info

TL-SM321A - 1000Base-BX WDM Bi-Directional SFP Module

Spotlight:- WDM Bi-Directional SFP Module- Supports WDM Bi-Directional technology, using a single strand of fiber, cost savingTP-LINK´s TL-SM321A adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km with TP-LINK´s Routers, Switches, Media Converters to provide high speed and stability.- Supports WDM Bi-Directional technology, using a single strand of fiber- TX: 1550nm / RX: 1310nm- Internal +3.3V Power Supply-... More Info

TL-SM321B - 1000Base-BX WDM Bi-Directional SFP Module

Spotlight:- WDM Bi-Directional SFP Module- Supports WDM Bi-Directional technology, using a single strand of fiber, cost savingTP-LINK´s TL-SM321B adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km with TP-LINK´s Routers, Switches, Media Converters to provide high speed and stability.Features- Supports WDM Bi-Directional technology, using a single strand of fiber- TX: 1310nm / RX: 1550nm- Internal +3.3V Power... More Info

Multi-core Fibre Cable, Available in all Fibre Sizes, from 4 Core to 24 Core

The Starlight™ Multi-purpose Uni-loose Tube Distribution Fibre Cable provides a cost effective solution to all internal or external fibre cabling requirements, particularly where on-site fusion splicing of pigtails is the preferred termination technique. The cable consists of a single central uni-tube containing individually colour coded 250μm buffered fibres. This tube is embedded in an E-glass roving, and oversheathed with a single Low Smoke Zero Halogen (LSZH) outer jacket. The jacket is flame retardant, UV stabilised and extremely... More Info

SC Loaded Fibre Patch Panel with Splice Management

This Starlight™ SC Fibre Patch Panel is available with a range of port densities. The fibre patch panels are manufactured from mild steel and finished in a black powder coating. They are suitable for mounting in 19" cabinets. The panels feature fully adjustable mounting brackets, numbered adaptor ports and a range of panel knock-outs to suit common gland sizes. The panels include a sliding tray for easy access to splices. Fibre Panels are supplied fully loaded and complete with splice management. Unloaded versions and other connect or... More Info

MTP Trunk Cables fitted with MTP connectors at each end, made to your...

The CCS Starlight® Pre-terminated Plug and Go Fibre System provides the Rapid Fibre Deployment market with an extremely cost effective, expandable and high speed system. Starlight® utilises MTP® brand pre-terminated assemblies to ensure optimum performance is achieved when interconnecting pre-terminated Starlight® cassettes and panels. Assemblies are available in 12 & 24 fibres, and micro and ruggedised cable in multimode OM2 50/125, OM3 50/125, OM4 50/125 and singlemode OS2 9/125 options. The Starlight® System is manufactured in our own... More Info