Data & Server Cabinets (472 products)
Inside Data & Server Cabinets
Basic Rack PDU , Input: 120V , Input Connections: NEMA 5-20P , Cord Length:...
Rack-MountableIncludes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.Single input power sourceSupply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.Wide range of input and output connectionsProduct family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having... More Info
800mm x 1000mm Cabinet Plinth for RackyRax server cabinets. More Info
Containment Adapter for Easy Rack, End Cap, 42U, Black, set of 2
Adapters for row solutions to provide full containment and increase cooling efficiency. These end caps fit on the adapters for the Easy Racks to seal the ends of the plenum on the front and rear of the row solution. More Info
2U, 30A, 208V, 12x C13s, 4x C19, NEMA L6-30P, 444 x 112 x 88 mm, 3360 g
AvailabilityAlarm Thresholds Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)Local Current Monitoring Display The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum... More Info
Vertical Cable Manager Netshelter SX 42U (4Qty)
4 piece cable management sections to allow patch cords to enter and exit in an organized manner. More Info
NetShelter SX External Air Sealing Kit (qty 10)
NetShelter SX External Air Sealing Kit (qty 10)External air sealing kit uses magnetic strips to seal openings at the base and the roof of up to 10 NetShelter SX racks, preventing air recirculation and increasing cooling efficiency. More Info
ReadyRails Sliding Rails Without Cable Management Arm
The ReadyRails™ sliding rail kit for 1U Systems, including the PowerEdge R310, R410, and R415, provides tool-less support for racks with square or unthreaded round mounting holes including all generations of Dell racks. They also support tooled mounting in 4-post threaded racks via an optional adapter brackets kit. The optional cable management arm (CMA) can be mounted on either the left or right side of the sliding rails without the use of tools for fast and easy deployment. More Info
NetShelter SX, 42U, w/o Doors, Black
NetShelter SX 42U 750mm Wide x 1070mm Deep Enclosure Without Sides Without Doors Black More Info
3.2-3.8kW Single-Phase ATS/Switched PDU, 200-240V Outlets (8 C13 & 2...
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output... More Info
Basic Rack PDU
- Input: 200V, 208V, 230V- Input Connections: NEMA L6-30P- Cord Length: 12 feet ( 3.66 meters )- Output: 208V More Info