*Orders placed after 5.30pm on 20th December will be processed on 2nd January 2025. Orders despatched on the 23rd December will be delivered at the earliest on the 2nd January 2025. Please note – Deliveries are not guaranteed*
Storm Darragh has caused severe delays at Holyhead. This has had a large knock on affect to freight coming from the UK and may cause delay in some orders being dispatched as we wait for stock to arrive.
Excellent
star star star star star
4.8 / 5
9138 Reviews
Paul 
star star star star star
Perfect service, product quality, value for money and prompt delivery, would recommend :)
Richard 
star star star star star
always quality cables and delivery very quick
Craig 
star star star star star
Great service and they were very helpful when the server cab wouldn't fit through the door
SignalTEK NT
  • SignalTEK NT
  • SignalTEK NT
  • SignalTEK NT

If you install, maintain or troubleshoot data cabling and Ethernet networks, SignalTEK NT allows you to prove the performance up to Gigabit Ethernet transmission rates.

  • SignalTEK NT is used to quickly prove that Ethernet will work correctly after installation in cable installations such as SOHO or residential cabling where cable certification is cost prohibitive or where the end customer does not require the cable manufacturer’s warranty programs. 
  • Workstation or Laptop has an extremely slow network access. SignalTEK NT can be used to run a simplified transmission test to check network performance. 
  • A 100Mb/s LAN environment gets upgraded to 1 Gb/s. SignalTEK NT can be used to check if the existing (old) cabling can support up to 1Gb/s Ethernet. 
  • An existing LAN installation gets upgraded to VoIP. SignalTEK NT can be used to check if both the cabling as well as the active components can support VoIP traffic. 
  • After MACs (Moves/Adds/Changes) of active devices, SignalTEK NT can be used to ensure minimum bandwidth requirements are met. 
  • In industrial Ethernet applications, SignalTEK NT can be used to verify cabling performance to 100Mb/s or Gigabit requirements. 
  • SignalTEK NT can be used to test throughput of an industrial Ethernet LAN


  • Now includes a touchscreen
  • Provide proof of performance to your clients with PDF reports.
  • IDEAL AnyWARE app - Send reports from anywhere.
  • Network traffic performance test to IEEE802.3ab standard.
  • Cable tracing - Port blink to visually trace cables.
  • Displays port ID of LLDP/CDP - Eliminate manual cable tracing.
  • Copper cable testing – Wiremap and distance to fault using TDR.
  • Fibre cable testing – optical power indication. (SFPs required)
  • PoE – Power over Ethernet verification with voltage.


Cable Installation:

Cabling:

  • Network traffic performance test on copper and fibre to IEEE802.3ab standard
  • Wiremap test for open, shorts, miswires and split pairs to TIA-568 standard
  • Gigabit link verification for copper and fibre cabling


Active network:

  • Network load testing through switches simulating CCTV/IPTV/VoIP/Web traffic
  • PoE/PoE+ verification that displays available voltage at device location
  • Check Ethernet connectivity at device location to 10/100/1000 Mb/s
  • Verify network configuration (device IP/gateway address/subnet mask)
  • Switch port identification via LLDP/CDP protocols

 

Troubleshooting/Diagnostics:

Cabling:

  • Distance to fault using TDR technology (copper only)
  • Ability to identify and trace cables with a compatible amplifier probe (62-164)
  • Optical power indication (with compatible SFP modules)


Active network:

  • Network load testing through switches simulating CCTV/IPTV/VoIP/Web traffic
  • Stress test network before installing bandwidth hungry devices
  • Port blink to visually trace cable from work area outlet to network switch
  • Displays port ID of LLDP/CDP enabled switches to eliminate manual cable tracing
  • Identify network connection problems as hardware, network or configuration faults
  • Ping local network devices and Internet URL’s
  • Count number of hops between network points with traceroute tests
  • PoE load testing to confirm available power meets PoE device requirements


Kit Contents

Includes 1 x display unit with touchscreen, 1 x remote unit, 2 x NiMH battery packs, 2 x patch cables -30cm, Cat 5e STP, 2 x power supply with EU/UK/US adapters, 1 x USB Wi-Fi adapter, 1 x Quick Reference Guide, 1 x carry case

You might also like

  • Connectix Pocket Socket Tester
    Connectix Pocket Socket Tester
  • LanXPLORER Pro – Premium Kit
    LanXPLORER Pro – Premium Kit
  • Wire Cutters
    Wire Cutters
  • Easy RJ45 Crimp Tool
    Easy RJ45 Crimp Tool
  • CCS Cable Stripper
    CCS Cable Stripper

Similar products

  • NaviTEK NT
    NaviTEK NT
  • SignalTEK CT
    SignalTEK CT
  • Connectix Pocket Socket Tester
    Connectix Pocket Socket Tester
  • FiberMASTER™ Fiber Optic Test Kit
    FiberMASTER™ Fiber Optic Test Kit

SignalTEK NT

Network Transmission Tester

R156005

1-3 Day Lead time

€2,975.11
€2,418.79 Ex VAT.