10G support | No |
AC input frequency | 50 - 60 Hz |
AC input voltage | 100 - 240 V |
Basic switching RJ-45 Ethernet ports quantity | 24 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Built-in processor | Y |
Cable types supported | Cat5,Cat6,Cat7 |
Cables included | AC |
Certification | UL, CSA, CE, FCC |
Depth | 203 mm |
Fiber optic connector | SFP |
Firmware upgradeable | Y |
Flash memory | 256 MB |
Flow control support | Y |
Form factor | 1U |
Heat dissipation | 117 BTU/h |
Height | 44 mm |
Internal memory | 512 MB |
LED indicators | Y |
MAC address filtering | Y |
MAC address table | 16384 entries |
Management protocols | SNMP v1,2,3 |
Mean time between failures (MTBF) | 101523 h |
Networking standards | IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
Noise level | 43.6 dB |
Number of power supply units | 1 |
Number of static routes | 1024 |
Number of VLANs | 4094 |
Operating relative humidity (H-H) | 10 - 90 % |
Operating temperature (T-T) | 0 - 50 °C |
Packet buffer memory | 1.5 MB |
Power over Ethernet (PoE) | No |
Quality of Service (QoS) support | Y |
Quick start guide | Y |
Rack mounting | Yes |
Reset button | Y |
Security algorithms | 802.1x RADIUS,HTTPS,MD5,SSH,SSL/TLS |
Spanning tree protocol | Y |
Storage relative humidity (H-H) | 10 - 90 % |
Storage temperature (T-T) | -20 - 70 °C |
Switch layer | L2/L3 |
Switch type | Managed |
Switching capacity | 56 Gbit/s |
USB 2.0 ports quantity | 1 |
Web-based management | Y |
Weight | 2700 g |
Width | 440 mm |
Cisco SG350-28SFP 28-Port Gigabit Managed SFP Switch, 440 x 257 x 44 mm, 2.7 kg, UK
SG350-28SFP-K9-UK
Out of Stock
We use cookies to make our website work. We also use cookies to improve your experience on this website. Please let us know your preferences.